HPC-G27 GSM900mhz Mobile Phone signal booster
GSM mobile networks are everywhere around the world but depending on where a mobile phone is located, regrettably the quality of the GSM signals differ significantly from excellent to poor. The item in auction is designed to address the signals strength issue by boosting the signals in two directions (Full Duplex) :
1.signals transmitted from a mobile phone are received by the signal booster over the air via the booster's indoor antenna and these signals are amplified and retransmitted over the air via the booster's outdoor antenna to a nearby cellular phone base station.
2.signals transmitted from a cellular phone base station are received over the air by the booster via the booster's outdoor antenna and these signals are amplified and retransmitted over the air via the booster's indoor antenna to a mobile phone.
The GSM Booster can be viewed as an intermediate agent to help to set up a reliable wireless link between a mobile phone and the GSM mobile networks infrastructure.
Applications:
The Booster is particularly useful in zones with poor GSM coverage such as basements, car parks and tunnels. It can also be used in offices, homes, supermarkets, cinemas and hotels etc.
It is specifically designed for indoor uses.
The Booster employed advanced filtering technology to reject the out of bands signals in the amplification stages, this results in crystal clear voice communication for an established GSM call as the GSM uplink and downlink signals are effectively isolated . Its AGC (Automatic Gain Control) mechanism ensures an optimum power is provided for the cell phone site as well as the mobile phone; all these are performed without user's intervention.
How the Booster benefits you
Reduce drop calls and improve GSM voice communication quality.
We provides signal boosters kits for any Homes, Offices, Cars, RV's, Boats and more. All amplifier kits come with Indoor and Outdoor Antennas, Cables, Power adapters and more.
HPC-G-27 GSM900mhz repeater Features:
1.With unique appearance design, have good cooling function
2.With MGC function,(Manual Gain Control), Customer can adjust the Gain as needed ;
3.With DL signal LED display, help to install the outdoor antenna at the best state;
4.With AGC and ALC, make repeater work stable .
5.PCB with isolation function ,make UL and DL signal not influence each other,
6.Low intermodulation, high Gain ,stable Output power
HPC-G-27 900mhz repeater Inside and Outside Design
Technical Features
Receiving and sending separation,low require for Ant isolation,making it convenient for installation.
Mini design with metal cavity filter technology inside.
Full-duplex&dual-port design,and built-in power supply,making it convenient for installation.
ALC technology used to provide auto amplitude fixing.
Modules structures,making it convenient for installation,debugging and maintenance.
Specification of HPC-G-27 Dual band repeater:
Electrical specification |
Uplink |
Downlink |
||
Frequency Range |
GSM900 |
890 ~ 915 MHz |
935 ~ 960 MHz |
|
Max .Gain |
≥ 70dB |
≥ 75dB |
||
Max .Output Power |
≥ 24dBm |
≥ 27dBm |
||
MGC ( Step Attenuation ) |
≥ 31dB / 1dB step |
|||
Automatic Level Control |
≥ 20dB |
|||
Gain Flatness |
GSM & CDMA |
Tpy≤ 6dB(P-P); DCS,PCS ≤ 8dB(P-P) |
||
WCDMA |
≤ 2dB/ 3.84MHz,Full Band ≤ 5dB(P-P) |
|||
Noise Figure |
≤ 5dB |
|||
VSWR |
≤ 2.0 |
|||
Group Delay |
≤ 1.5μs |
|||
Frequency stability |
≤ 0.01ppm |
|||
Spurious Emission & Output inter-modulation |
GSM Meet ETSI TS 151 026 V 6.1.0 |
|||
WCDMA Meet 3GPP TS 25.143 ( V 6.2.0 ) | ||||
CDMA Meet IS95 & CDMA2000 | ||||
WCDMA System |
Spurious Emission Mask |
Meet 3GPP TS 25.143 ( V 6.2.0 ) |
||
Modulation Accuracy |
≤ 12.5% |
|||
Peak Code Domain Error |
≤ -35dB@Spreading Factor 256 |
|||
CDMA System |
Rho |
ρ > 0.980 |
||
ACPR |
Meet IS95 & CDMA2000 |
|||
Mechanical Specifications |
Standard |
|||
I /O Port |
N-Female |
|||
Impedance |
50 ohm |
|||
Operating Temperature |
-25ºC~+55ºC |
|||
Environment Conditions |
IP40 |
|||
Dimensions |
155x112x85mm |
|||
Weight |
≤ 1.50Kg |
|||
Power Supply |
Input AC90-264V,output DC 5V / 3A |
|||
LED Alarm |
Standard |
|||
Power LED |
Power Indicator |
|||
UL LED |
Be lighted when there is phone calling |
|||
DL 1 |
Be lighted when Outdoor signal is -65dB |
|||
DL 2 |
Be lighted when Outdoor signal only -55dB |
|||
DL 3 |
Be lighted when Outdoor signal only -50dB |
The installtion of the Repeater
Outdoor antenna ( for receiving the signal from the BTS ) + Cable ( transfering the received signal) + Repeater ( for amplifying the received signal) + cable( for transfering the amplified signal) + indoor antenna( for shooting the amplified signal),
(Note : Omni indoor antenna is 3dBi,it can work with about 200m2 . If need repeater coverage larger area , need add more antenna,the HPC-G-27 Max can work with 10pcs indoor antenna. ( when add antenna ,please remember to take splitters )
Installation Approaches:
Fix up outdoor antenna reception on housetop and point to signal tower
Connect outdoor antenna to 'outdoor' port in repeater machine through cable
Connect indoor antenna(s) to 'indoor' port in repeater machine through cable also
Plug power adaptor into AC power socket and finish installation
Technique Supporting:
If still no signal receipt after activated repeater, please check if outdoor antenna point to
signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
If strength is not steady, please check if outdoor and indoor antenna are too close.
Please ensure the outdoor and indoor antenna have distance of 20 meters at least ,
with a wall between and net a same horizontal line
Picture show:
Terms and Conditions
Certificate |
CE/RoHs |
Country of Origin |
China |
Port of Dispatch |
Shenzhen |
Production Capacity |
1000pcs/month |
Date of Delivery |
Within 3 days after received payment inform |
MOQ |
10pcs |
Warranty |
2years |
Pacakge |
1pcs/box; 20pcs/carton |
Country of Origin |
China |